Product Name: Small diamond wire cutting machine
Model: SCK-202A
Product Introduction:
SCK-202A small diamond wire cutting machine is specially designed for material researchers, for precision cutting of brittle material samples, can slice, cut, square, etc. the material, and the rotary turntable can also cut the specimen at a certain angle. Materials that can be cut include ceramics, crystals, glass, metals, rocks, thermoelectric materials, infrared optical materials, composite materials, and biomedical materials. This machine is a diamond wire cutting machine that can be continuously cut, the sample is fed continuously after the cutting program is set, no manual adjustment is required, and the dimensional accuracy of the cut sample is high, within the range of ±10μm. The cutting line adopts the cyclic reciprocating motion mode of a single wire, and the length of the thread that can be used is long, and the service life of one line is long, which improves the cutting efficiency. The tension wheel adopts the mode of spring tension, the spring rigidity is strong, the tension force is large, the tension force remains unchanged during the cutting process, and the tension of the diamond wire is maintained. When using it for ultra-thin precision cutting, the thickness of the cut sheet (within about 1 inch) can reach 0.08mm.
main features:
1, can be used for cutting a variety of different hardness materials, especially suitable for brittle, easy cleavage crystal cutting.
2, easy to operate, good processing quality.
3.Aluminum profile structure, beautiful and light.
Technical Parameter:
Product name | SCK-202A small diamond wire cutting machine |
Product model | SCK-202A |
Installation conditions | 1. This equipment is required to be used below 1000m above sea level, temperature 25°C±15°C, humidity 55%Rh±10%Rh. 2. Water: None. 3. Electricity: AC220V 50HZ. 4. Gas: None. 5. Table size: 1000mm*600mm*700mm. 6. Ventilation device: required. |
Main parameters | 1、 Power supply voltage:220V 50Hz； Maximum power: <100w2, spindle speed:2rpm-260rpm Internally adjustable3、Control system: 2、 ①Manual control: And、ZShaft speed range1-40mm/min (2)Automatic control: AndShaft feed length0.01-50mm； WithShaft feed speed0.05mm-40mm/min ZShaft feed length1-60mm； 3、 Automatic number of cuts1-99； 4、 Total length of cutting line:20m 5、 The inner spacing of the two guide wheels:95mm 6、 YAxis travel:≤50mm 7、 ZAxis travel:≤60mm 8、 Two-dimensional fixture: horizontal rotation0-360°, left and right inclination±20° 9、 Carrier plate size:80mm×51mm 10、 Cutting depth:≤50mm 11、 Maximum sample size for cutting:?50mm×50mm |
Product specifications | Size: 414mm×500mm×750mm; Weight: 40kg
|
Functional use | 1. Ceramic materials: alumina ceramics, zinc oxide ceramics, zirconia ceramics, target ceramics, honeycomb ceramics, semiconductor ceramics, conductive ceramics, non-conductive ceramics, etc.; 2. Crystal materials: graphite, silicon crystals (solar polysilicon, monocrystalline silicon), sapphire, Alumina crystals, infrared glass crystals, alumina crystals, silicon carbide crystals, cesium iodide crystals, etc.; 3. Glass materials: sulfur glass, optical glass, quartz glass, infrared glass, glass tube, etc.; 4. Metal materials: iron, aluminum, copper, titanium alloy, magnesium alloy and other metals and alloys, non-ferrous metals (zinc sulfide, ferrite), etc.; 5. Composite materials: PVC board, carbon fiber composite material, glass fiber composite material, etc
6. Rock materials: natural rock, jade, meteorite, Pei Cui, agate and other precision cutting; Precision slicing of all types of high-value materials; Geological light sheets, geological flakes (sedimentary rocks, magmatic rocks, metamorphic rocks, ores) and other open sections. 7. Thermoelectric materials: bismuth telluride, lead telluride, silicon germanium alloy, etc. 8. Infrared optical materials: zinc selenide, zinc sulfide, silicon, germanium and other crystals
9. Biomedical materials: bioplasticized specimen section (Human animal organs, joint sections of jaw soft and hard tissue, implant observation, tooth crown bridge, teeth and other histological specimens); Orthopedic joint sections of soft and hard tissues (living and hard tissues such as femur, hip joint, vertebral body, bone histology samples with implants, etc.); Cardiovascular and cerebrovascular stent sections, stone sections and other medical tissue sections; ...... Note: The material hardness is less than that of diamond wire can be precision cut. |
Standard accessories:
serial number | name | quantity | Image link |
1 | Tensioner | 2 pcs |
|
2 | Guide wheels | 2 pcs |
|
3 | Cross fixture | 1 set |
|
4 | Diamond wire | 3 volumes |
|
5 | water pump | 1 pc |
|
6 | Resin ceramic block | 2 pieces |
|
7 | Paraffin wax rods | 4 roots |
|
Options:
disclaimer
The product introduction content of this site (including product pictures, product descriptions, technical parameters, etc.) is for reference only. There may be some discrepancies between the content described and the actual situation due to the untimely update, please contact the company's sales staff to confirm. The information provided on this site does not constitute any offer or commitment, and Scienkey will improve and modify any information on the website from time to time without notice.
19139962909 
